2205 duplex stainless steel channel
2205 Duplex Steel Channel Introduction
2205 Duplex Stainless Steel Channel is a structural steel with excellent mechanical properties and corrosion resistance that is widely used in demanding environments. Channel steel, often referred to as U-shaped steel with usually flat edges, is used in a variety of structural applications.
Standards and certifications
2205 Duplex Stainless Steel Channel typically conforms to specific international and regional standards, such as ASTM A240 (American Society for Testing and Materials) or EN 10028-7 (European Standard). Confirming that a product complies with applicable standards and certifications is an important quality assurance step when making a purchase.
2205 Stainless Steel Channel Advantage
Excellent corrosion resistance
Due to its high chromium and molybdenum content, 2205 duplex channel steel has much higher corrosion resistance than standard austenitic stainless steels such as 304 and 316. It performs particularly well in chloride-containing and seawater environments.
high strength
The yield strength of 2205 duplex steel channel is about 250MPa, which is twice as high as ordinary austenitic stainless steel, so the wall thickness can be reduced and the weight can be lightened when designing, thus reducing the cost.
Good welding properties
2205 Duplex Steel Channel has good welding performance and does not require preheating or post heat treatment. However, in order to maintain its excellent corrosion resistance and mechanical properties, it should be properly heat treated after welding.
Good impact resistance
The duplex structure provides higher strength and toughness. The ferrite phase provides good impact resistance, while the austenite phase provides higher ductility and toughness.2205 Duplex Steel Channel maintains good impact resistance at low temperatures.
Precautions for maintenance and use
- Surface Maintenance: Although 2205 duplex stainless steel channel has excellent corrosion resistance, improper surface preparation or maintenance can still lead to corrosion. Regularly clean and inspect surfaces to avoid the accumulation of contaminants that may cause pitting or crevice corrosion.
- Environmental considerations: Under extreme environmental conditions (e.g. extremely high or low temperatures), the thermal expansion and contraction characteristics of 2205 duplex stainless steel channel should be taken into account, and appropriate mounting and support structures should be selected to prevent deformation or damage.
Application Areas
Duplex Stainless Steel is widely used in several applications due to its excellent mechanical properties and corrosion resistance. The following are some of the major applications of Duplex Stainless Steel:
Leave your contact information
We will call you back within 24 hours.
English 
Chinese 